You must be logged in to post a review.
Pin36 – 36″ Pin
$32.00
PART# Pin36
Rods are available for both stands and attaching ramps to skid seats
When ordering please specifiy the width of your Skid Seats or if the rod is for the Stand
All steel rods for ramp attachment are 3/4″ in diameter
All rods accept the Standard Hitch Pin
Category: Loading Ramps
Related products
8FRAMP – 8′ Heavy Duty Ramp Set – 23,500LBS Weight Capacity Per Axle
$7,639.38
RHKeeperL – Long Ramp Hanger Keeper
$28.00
Q2520RH – Right Stake
$150.00
PART# Q2520RH
Holds ramps upright for use as levelers (1 pair required per ramp, 1 left (shown) & 1 right
Use chain binder with up to 3/8 chain to securely fasten stakes to trailers stake pockets
Eight heights available to accomodate different trailer drops; 16″, 18″, 19″, 20″, 21″, 22″, 24″, and 26″
Getting the correct stakes is important. When using spacers, stake height = ramp width + spacer height used.
Some trailers have a narrow pocket. Measure stake pocket to be sure to get correctly sized stake inserts.
Stake inserts are designed to be reversed to allow for up to a 1″ difference in trailer rub rail widths
Pin20 – 20″ Pin
$28.00
Q4513LH – Double Ramp Hanger Left
$230.00
10FRAMP – 10′ Heavy Duty Ramp Set – 20,000LBS Weight Capacity Per Axle
$3,500.00
Q3134RH – Single Ramp Hanger Right
$230.00
PART# Q3134RH
Carries ramps beneath the trailer
Available in both Single and Double hangers
Order as a pair, left and right for both the single and double ramp hanger
There must be, at a minimum, 99″ of clear space to mount hangers
Ramp Hangers are complete with Keepers and Pins
Shows pair on the picture. It comes only one!
Reviews
There are no reviews yet.