There are two sizes
Ramp Hanger Keeper Long for double ramp hangers holding ramps with 6″ tubes
Ramp Hanger Keeper Short for single ramp hangers and stand hangers
These keepers will also accommodate padlocks in place of the Lynch Pin Keeper
Holds ramps upright for use as levelers (1 pair required per ramp, 1 left (shown) & 1 right
Use chain binder with up to 3/8 chain to securely fasten stakes to trailers stake pockets
Eight heights available to accomodate different trailer drops; 16″, 18″, 19″, 20″, 21″, 22″, 24″, and 26″
Getting the correct stakes is important. When using spacers, stake height = ramp width + spacer height used.
Some trailers have a narrow pocket. Measure stake pocket to be sure to get correctly sized stake inserts.
Stake inserts are designed to be reversed to allow for up to a 1″ difference in trailer rub rail widths
Carries ramps beneath the trailer
Available in both Single and Double hangers
Order as a pair, left and right for both the single and double ramp hanger
There must be, at a minimum, 99″ of clear space to mount hangers
Ramp Hangers are complete with Keepers and Pins
Shows pair on the picture. It comes only one!