There are two sizes
Ramp Hanger Keeper Long for double ramp hangers holding ramps with 6″ tubes
Ramp Hanger Keeper Short for single ramp hangers and stand hangers
These keepers will also accommodate padlocks in place of the Lynch Pin Keeper
Adjusts from 18″ tall to 24″ tall.
Works with all Load Leveler ramps
May be hung beneath trailer with optional hangers
All ramps pin to stands for secure connection
All stands come complete with Base, Upper Section, all Pins and Keepers
5 Capacities: 32,000; 23,500; and 20,000, 15,000 and 10,000 lbs.maximum per axle.
32,000 lb. max per axle ramp in 18″ and 20″ widths
23,500 lb. max per axle ramps in 18″, 19″, and 20″ widths.
20,000 and 10,000 lb. max per axle ramp in 16″ width
15,000 lb. max per axle ramp in 18″ & 20″ width
All ramps are 8 feet in length
All ramps have pin ends for secure connection to the trailer (requires Skid Seat) and stands
20,000 & 32,000 lb. max per axle rated ramps are 6 inches thick, others are just 5″ thick
Converts to a Leveler with the use of optional stakes
Three lumber clips per ramp required when used as load levelers.
May be hung from beneath your trailer for easy transport using optional hanging system
Rods are available for both stands and attaching ramps to skid seats
When ordering please specifiy the width of your Skid Seats or if the rod is for the Stand
All steel rods for ramp attachment are 3/4″ in diameter
All rods accept the Standard Hitch Pin