You must be logged in to post a review.
Q1750 – Skid Seat
$150.00
PART# Q1750
Available in 36″
Welding to trailer is preferred because of its strength, but bolting to trailer may be used.
May be trimmed to fit around stake pockets on upper or rear deck
May be mounted to either or both upper and lower decks
Be sure to order the type appropriate for the deck being equipped
Aluminum Skid Seats come equipped with Rods and Standard Hitch Pins
Reviews (0)
Shipping & Delivery
Related products
Q2520RH – Right Stake
PART# Q2520RH
Holds ramps upright for use as levelers (1 pair required per ramp, 1 left (shown) & 1 right
Use chain binder with up to 3/8 chain to securely fasten stakes to trailers stake pockets
Eight heights available to accomodate different trailer drops; 16″, 18″, 19″, 20″, 21″, 22″, 24″, and 26″
Getting the correct stakes is important. When using spacers, stake height = ramp width + spacer height used.
Some trailers have a narrow pocket. Measure stake pocket to be sure to get correctly sized stake inserts.
Stake inserts are designed to be reversed to allow for up to a 1″ difference in trailer rub rail widths
Q6895 – 10′ Heavy Duty Ramp 20,000Lbs Capacity Per Axle
PART# Q6895
5 Capacities: 32,000; 23,500; and 20,000, 15,000 and 10,000 lbs.maximum per axle.
32,000 lb. max per axle ramp in 18″ and 20″ widths
23,500 lb. max per axle ramps in 18″, 19″, and 20″ widths.
20,000 and 10,000 lb. max per axle ramp in 16″ width
15,000 lb. max per axle ramp in 18″ & 20″ width
All ramps are 8 feet in length
All ramps have pin ends for secure connection to the trailer (requires Skid Seat) and stands
20,000 & 32,000 lb. max per axle rated ramps are 6 inches thick, others are just 5″ thick
Converts to a Leveler with the use of optional stakes
Three lumber clips per ramp required when used as load levelers.
May be hung from beneath your trailer for easy transport using optional hanging system
Reviews
There are no reviews yet.