You must be logged in to post a review.
Sold out
RHKeeperS – Short Ramp Hanger Keeper
$26.00
PART# RHKeeperS
There are two sizes
Ramp Hanger Keeper Long for double ramp hangers holding ramps with 6″ tubes
Ramp Hanger Keeper Short for single ramp hangers and stand hangers
These keepers will also accommodate padlocks in place of the Lynch Pin Keeper
Out of stock
Compare
Reviews (0)
Shipping & Delivery
Related products
Q4476 – 8′ Heavy Duty Ramp 23,500Lbs Capacity Per Axel
PART# Q4476
5 Capacities: 32,000; 23,500; and 20,000, 15,000 and 10,000 lbs.maximum per axle.
32,000 lb. max per axle ramp in 18″ and 20″ widths
23,500 lb. max per axle ramps in 18″, 19″, and 20″ widths.
20,000 and 10,000 lb. max per axle ramp in 16″ width
15,000 lb. max per axle ramp in 18″ & 20″ width
All ramps are 8 feet in length
All ramps have pin ends for secure connection to the trailer (requires Skid Seat) and stands
20,000 & 32,000 lb. max per axle rated ramps are 6 inches thick, others are just 5″ thick
Converts to a Leveler with the use of optional stakes
Three lumber clips per ramp required when used as load levelers.
May be hung from beneath your trailer for easy transport using optional hanging system
Q6895 – 10′ Heavy Duty Ramp 20,000Lbs Capacity Per Axle
PART# Q6895
5 Capacities: 32,000; 23,500; and 20,000, 15,000 and 10,000 lbs.maximum per axle.
32,000 lb. max per axle ramp in 18″ and 20″ widths
23,500 lb. max per axle ramps in 18″, 19″, and 20″ widths.
20,000 and 10,000 lb. max per axle ramp in 16″ width
15,000 lb. max per axle ramp in 18″ & 20″ width
All ramps are 8 feet in length
All ramps have pin ends for secure connection to the trailer (requires Skid Seat) and stands
20,000 & 32,000 lb. max per axle rated ramps are 6 inches thick, others are just 5″ thick
Converts to a Leveler with the use of optional stakes
Three lumber clips per ramp required when used as load levelers.
May be hung from beneath your trailer for easy transport using optional hanging system
Q1750 – Skid Seat
PART# Q1750
Available in 36″
Welding to trailer is preferred because of its strength, but bolting to trailer may be used.
May be trimmed to fit around stake pockets on upper or rear deck
May be mounted to either or both upper and lower decks
Be sure to order the type appropriate for the deck being equipped
Aluminum Skid Seats come equipped with Rods and Standard Hitch Pins
Reviews
There are no reviews yet.