Heavy Duty Tarps

Coupon Code
00:00:00
🎉 New Year Special Offer!

Hurry up! Limited time offer - Start the year right!

SUMMER15

Valid on orders
Over $500 Only!

Showing 13–16 of 16 resultsSorted by price: high to low

Heavy duty flatbed tarps built for daily tarping. Every tarp in this category uses tear-resistant ripstop fabric with heat-sealed, 100% waterproof seams, stainless steel D-rings with protection flaps, 2″ webbing in the hems and grommets stitched every 2 ft around the edge, and every one is made in our own facility. What changes between models is the fabric: full ripstop vinyl, a hybrid with lighter parachute-fabric sides, or parachute fabric throughout.

What Makes These Tarps Heavy Duty

  • Ripstop fabric: the reinforced weave stops small tears from spreading.
  • 100% waterproof: heat-sealed seams keep water out of the load.
  • Stainless steel D-rings: 2 to 5 rows depending on the model, each with a protection flap against abrasion.
  • Reinforced hems: 2″ webbing sewn into the edges.
  • Grommets every 2 ft: tie-down points all the way around the tarp.

Ripstop Vinyl, Hybrid or Parachute Fabric?

BuildFabricWhy Choose ItExamples
Ripstop vinylRipstop vinyl on top, sides and flaps; 18 oz on the 27′ × 16′ steel tarpMaximum abrasion resistance on steel and low-profile loads27′ × 16′ steel tarp · steel set
HybridRipstop vinyl top and flap, ripstop parachute-fabric sidesVinyl where the load rubs, lighter sides for easier handling8 ft set · 6 ft set · 10 ft set
Parachute fabricParachute fabric throughout; 10 oz on the 20′ × 34′ tarpThe lightest heavy duty tarps for solo drivers27′ × 24′ · 20′ × 34′

Heavy Duty Tarps by Load and Trailer

Recommendations below come from our own product listings.

Load / TrailerDropTarps
Steel and low-profile loads, flatbed or step deck4 ft27′ × 16′ · 2-piece set
Standard flatbed loads6 ft27′ × 20′ · 2-piece set
Taller lumber and freight on flatbeds8 ft27′ × 24′ · 2-piece set · 3-piece set
Tall freight on step decks10 ft21′ × 28′ · 16′ × 28′ · 3-piece set
Double drop, RGN and oversize12 ft20′ × 34′ · 2-piece set

Keep a Heavy Duty Tarp in Service

Put corner protectors or felt padding between sharp load edges and the tarp, check D-rings and grommets when you fold it, and patch small tears before they grow with a tarp repair kit. Remember that a tarp is not a tie-down: secure the load first, then tarp it.

Frequently Asked Questions About Heavy Duty Tarps

What makes these tarps heavy duty?

The construction: tear-resistant ripstop fabric, heat-sealed 100% waterproof seams, stainless steel D-rings with protection flaps, 2″ webbing in the hems and grommets stitched every 2 ft. Every tarp is made in our own facility.

What is ripstop, and why does it matter?

Ripstop fabric has a reinforced weave that stops a small tear from spreading across the tarp. A snag stays a small repair instead of a split panel.

Which is lighter: ripstop vinyl, hybrid or parachute fabric?

Parachute fabric throughout is the lightest build, the hybrid (vinyl top, parachute-fabric sides) is in the middle, and full ripstop vinyl is the heaviest. The lighter builds are easier to throw and fold when you tarp alone.

Which heavy duty tarp should I use for steel?

Our ripstop vinyl steel tarps: the 27 x 16 ft tarp (18 oz ripstop vinyl) and the 2-piece steel set, both with a 4 ft drop for low-profile loads on flatbeds and step decks.

How do I repair a torn heavy duty tarp?

Patch small tears early. Our tarp repair kits and HH-66 vinyl glue cover vinyl and parachute-fabric repairs.

Shop heavy duty tarps below. Sorting by load type instead? See lumber tarps, steel tarps or flatbed truck tarps.

Free Shipping Free Shipping On All Orders
Free Return Free Shipping Money Back Guarantee
Support 24 7 Support 24 / 7 Customer Care Live Support
Engagement Engagement Truck Trailer Pro
_Responsible-Driver Responsible Driver Safety Comes First
Satisfaction Satisfaction Exceeding Your Expectations
Free Return Store Pickup Everyday Store Pick Up
100% Safe & Secure 100% Safe & Secure Security Checkout