Showing 13–23 of 23 resultsSorted by price: high to low
Hurry up! Limited time offer - Start the year right!
Valid on orders
Over $500 Only!
Showing 13–23 of 23 resultsSorted by price: high to low
Heavy duty trailer ramps for loading equipment onto flatbed, step deck and lowboy trailers. We carry 8 ft and 10 ft pin-end ramps rated by maximum weight per axle, complete ramp sets with the hardware to mount them, and the individual hangers, skid seats, stakes and pins to build or repair a ramp system.
| Ramp | Length | Capacity | What’s Included |
|---|---|---|---|
| 8 ft Heavy Duty Ramp (Q4476) | 8 ft | 23,500 lb per axle | Single ramp |
| 10 ft Heavy Duty Ramp (Q6895) | 10 ft | 20,000 lb per axle | Single ramp |
| 8 ft Heavy Duty Ramp Set (8FRAMP) | 8 ft | 23,500 lb per axle | 4 ramps, 2 hanging support stands, 4 double ramp hangers, 2 stand hangers, 4 skid seats, 4 stakes, 6 lumber clips, bolt kit |
| 10 ft Heavy Duty Ramp Set (10FRAMP) | 10 ft | 20,000 lb per axle | 2 ramps, 4 single ramp hangers, 4 skid seats, bolt kit |
Capacity is the maximum weight per axle. Check the axle weights of the equipment you load, not just its total weight.
With the optional stakes, the heavy duty ramps convert to load levelers. Three lumber clips per ramp are required when the ramps are used this way. The 8 ft ramp set already includes four stakes and six lumber clips.
Make sure every pin and clip is in place before anything rolls onto the ramps, keep the ramps square to the trailer, and stay within the per-axle rating. Once the equipment is on the deck, secure it before moving: machinery of 10,000 lb or more needs at least four tie-downs under 49 CFR 393.130. See the machinery securement guide and the chain and binder kit.
By maximum weight per axle. The 8 ft heavy duty ramp is rated at 23,500 lb per axle and the 10 ft heavy duty ramp at 20,000 lb per axle.
The ramps have pin ends that connect to the trailer through skid seats, which are sold separately and included in the ramp sets. Pin rods and hitch pins hold the connection.
Four 8 ft ramps, two hanging support stands, four double ramp hangers, two stand hangers, four skid seats, four stakes, six lumber clips and a complete bolt kit for your trailer.
Yes. With the optional stakes the ramps convert to levelers, and three lumber clips per ramp are required when they are used as load levelers.
They can hang beneath the trailer using the optional hanging system: ramp hangers, stand hangers and hanging support stands.
Use the “Notify me when stock is available” form on the product page to get an email when it is back.

Receive 1 weekly email with unbeatable, pro tips, and event highlights.